<big id="tr1xp"><sub id="tr1xp"></sub></big>
<track id="tr1xp"></track>
<p id="tr1xp"></p>

        <video id="tr1xp"></video>

        <listing id="tr1xp"></listing>

        <font id="tr1xp"><menuitem id="tr1xp"></menuitem></font>

        <dl id="tr1xp"></dl>
        歡迎來到- 無錫艾力科數控設備有限公司 的官方網站,   數控輪轂外圈溝磨床、球軸承套圈磨超自動線、超精機!
        全國銷售與服務熱線
        0510 - 83293888
        產品展示product
        MG1050B高精度無心磨床
        High Precision Centerless Grinder

        主要用途

        本機床適用于幾何精度和表面質量要求高的各種圓柱體零件、環形零件的無心通磨磨削,也適用于圓錐角不大于3°圓錐體零件和各種成型旋轉零件的無心切入磨削,尤其適用于大批量的生產要求。

        Application

        This machine can be used for through feed grinding of cylindrical and ring type parts with high accuracy and surface finish and also for plunge feed of taper parts with a taper smaller than 3°and formed parts.It can also be used for mass production.

        結構特點

        1、砂輪主軸采用懸臂動壓軸承,導輪主軸采用滾動軸承雙支承結構;

        2、砂輪修整器進給運動由伺服電機驅動滾珠絲桿來實現,導輪修整器、手動進給,砂、導輪修整器往復運動均由油缸來實現

        3、導輪主軸驅動用交流電機經變頻實現無極調速

        4、機床主進給由伺服電機經滾珠絲桿螺母副帶動導輪架進給與補償

        5、電氣采用三菱控制系統(用戶指定)。

        Main structural features

        1.The grinding wheel spindle adopts the cantilever type dynamic bearing, while reg.wheel spindle is dually supported by the rolling bearing.

        2.The servo motor drives the ball-screw to perform feed movement of gri.wheel dresser.Reciprocating Movement of regulating & grinding wheels and Manual feed are achieved by the oil cylinder

        3.The erg.Wheel spindle is driven by a AC freq.Conversion motor to achieve a stepless speed-regulation.

        4.Reg.Wheelhead feed & comp.is performed by a Servo motor through a ballscrew and nut pair.

        5.Mitsubishi control system is adopted.

        工作精度

        (標準試件Φ20×90mm)

        圓度:  0.001mm

        圓柱度:0.0015mm

        粗糙度:Ra0.16um

        Working accuracy

        (Standard testing workpiece Φ20×90mm)

        Roundness:0.001mm

        Cylindricty: 0.0015mm

        Roughness:Ra0.16um

        技術參數

        Technical Parameter

        磨削工件直徑
        Dia. Of work to be ground
        5~50mm
        磨削工件長度
        Length of work to be ground
        通磨
        Through feed
        200mm
        切入磨
        Plunge-in feed
        145mm
        砂輪規格
        Grinding wheel spec.
        P500×150×305mm
        導輪規格
        Regulating wheel spec.
        P350×150×177.8mm
        砂輪轉速
        Grinding  wheel speed
        1330r/min
        導輪轉速(無極)
        Swivel angle of reg.wheel
        10~290r/min
        導輪回轉角
        Swivel angle of reg.wheel
        垂直面內
        In a vertical plane
        -2°~+7°
        水平面內
        In a horizontal plane
        0~+3°
        導輪軸向位移調整量
        Axial displancement of reg.wheel
        ±5mm
        導輪架小進給值
        Min.feed amount of reg.wheelhead
        1μm
        砂輪修整器小進給值
        Min.feed amount of gri.wheel dresser
        1μm
        導輪修整器每格進給值
        Reg.wheel dresser feed amount per division
        0.01mm
        導輪修整器在水平面內的回轉角
        Swivel angle of reg.wheel dresser in a horizontal piane
        -2°~+7°
        導輪修整器金剛占位移調整量
        Displacement of reg.wheel dresser diamond
        ±15mm
        砂輪與導輪中心連線至托架底面距離
        The distance between the centerlines  of gri.&Reg.wheels and work rest bottom
        200mm
        砂輪與導輪中心連線至床身底面距離
        The distance between the centerlines of gri.&Reg.wheels and bed bottom
        1050mm
        機床總功率
        Total power of machine
        22kW
        機床外形尺寸
        Overall dimension of machine
        355cm×270cm×200cm
        機床凈重
        Net weight of machine
        約5000kg